T4- Natural High Lumen Low Profile Minimal Trim


£ 103.00

Softening Diffusion Lens
Softening Diffusion Lens
£ 15.00
£ 15.00
Minimal Trim Housing
Minimal Trim Housing
£ 14.00
£ 14.00

T4- Natural High Lumen Low Profile Minimal Trim

£ 103.00 103.0 GBP £ 103.00

£ 103.00

    This combination does not exist.

    Stock Code :
    T4- Natural High Lumen Low Profile Minimal Trim
    Share :

    Product Description

    The Natural low profile minimal trim is an architectural downlight, combined with the natural range of light sources the luminaire is designed to give incredible colour rendering with flicker-free dimming to 0.1%. It sits proud of the ceiling by 3mm and is only 65mm in diameter, almost invisible in the ceiling especially when used with paintable front plates and provides visual comfort by reducing glare.

    This product is non fire-rated (but 60-minute and 120-minute fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling.

    The Natural High Lumen light sources Deliver up to 1271 lm (efficacy 91.5 lm/W) with a CRI of 98 (R9-99) and a colour consistency of 2.5 SCDM. These light sources have onsite changeable optics and a range of beam angles (10°, 14°, 25°, 35°, 55°) as well as an asymmetric wall wash. There is support for various driver options and a choice of dimming to either 1% or 0.1%. It is a high-quality flexible light source which suits a wide range of applications and has a lifespan of 70,000 hours.

    Technical Information

    Physical Characteristics


    Cut out                                          62 mm

    Minimum Ceiling Void Depth    105mm - 113 mm

     Weight                                         482 g


    Housing: Mild steel galvanised & powder coated

    Technical Characteristics

    Fire & Insulation

    Non Fire-Rated

    Not suitable for covering with  insulation

         (see insulation covering accessories)

    Air Tightness

    When used with a Thermahood conforms to 

    • C2 – Condensation
    • L1 – Insulation And Air Leakage
    • E1 – Sound Protection

     Standards & Ratings

    BSEN 60958



    5 years (Luminaire parts and materials)

    Electrical Characteristics


    3 Pole, 16A screwless

    Cable capacity

        4 x 1mm or 2 x 1.5mm

    Emergency Pack

    Available option, delivers 17% of the lumen output


    Light Engine           12.7W

    Circuit Power         add 3.5W for Driver


    Thermal cut-out, Short circuit protection, Open circuit protection, Overload protection 

    PFC                          0.95

    see individual driver datasheet for more details

    Product Features

    Lighting Looking fabulous

    Minimal Trim

    Arguably one of the most discrete downlights available as it is only 3mm high and the Bezel has a diameter of 65mm

    Paintable front plates

    With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing unlike other light fittings.

    Wide range of accessories

    Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.

    ... simple to use and maintain

    Easy maintenance

    No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.


    Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.

    What's in the box

    This product has everything you need to install and fit our product with the exception of the GU10 lamp

    First Fix Housing

    The Housing (or Mounting Ring) complete with the supply connector and  installation instructions

    GU10 Lampholder and connector

    The "plug and play" GU10 Lampholder is pre-wired for your  convenience


    Three magnets are supplied, they have a small recess in them to hold the lamp in place. the Lamp can be located in between any of the magnets - depending on the look required

    Painting Card

    We supply a painting card to protect the interior of the first fix housing from contamination from paint, if you are painting the ceiling with the housing installed

    5-Year Warrantee

    Levello products come with a 5-year warrantee


    First Fix Installation

    Installation is simple and quick.

    A reasonably accurate 62mm hole needs to be cut in the ceiling, our Holesaw Stabiliser is ideal for this. The supply cable is terminated to the connector and then the housing is inserted into the hole, twisting it clockwise to allow Housing anchors to lock into place. 

    If painting after the housing has been installed please use the Painting cards provided to protect the inside of the housing from contamination.

     Housing Installation Guide


    Second Fix Installation

    Firstly, fit the lamp into the Low Profile Insert (see previous video), plug in the connector and fit the insert into the housing.

    You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page  - link below

    PDF Guide

                        Second Fix Installation

    No Specifications

    Option's Documents