Stock Code :LE5000P
Pendant Sets are available with Bayonet or Eddison Screw lamp holders. The set includes a pendant bridge, a lamp holder, front plate and a mains connector. Paintable versions come as a kit which needs to be assembled.
The flexibility of Levello is amply demonstrated by the ability to swap out a downlight for a pendant. This is achieved with our pendant bridge, which is inserted through the housing and into the ceiling void, resting on the upper surface of the ceiling. The pendant cord hangs on top of the bridge anchored by a cable strain. Installation is quick and easy with our connectors, eliminating tricky connections at height. Pendant kits are tested to a maximum weight of 5 Kg.To keep ordering simple we only supply the DROP range of products as “inserts” and therefore housings need to be ordered separately. Products with paintable plates come as a kit of parts which require assembly, as the front plate needs to be painted before the cable is passed through it, assembly of the kit is straightforward.
Seamless pendant sets from Levello allow you to install pendant lighting in a trim-less style. By installing the Levello insert frame into your ceiling you can then add a pendant set which produces a totally flush finish for your ceiling space.
Allows you to do a first fix installation by connecting the wiring and insert module. Then plaster or paint the ceiling to get the ultimate minimalist lighting design. Ideal for mixing pendant lighting with Levello downlights in the same room.
Requires an additional housing, they allow pendants to use the same installation type as downlights or devices. You install the first fix housing with wiring connector and these pendants can be connected on the second fix.
Cut out 62 mm
Minimum Ceiling Void Depth 112 mm
- measured with 53.5 GU10 lamp - Measure your lamp
(excluding GU10 Lamp) 214 g
Housing: Mild steel galvanised & powder coated
Insert: Anodised aluminium
Fire & Insulation
Not suitable for covering with insulation
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
5 years (Luminaire parts and materials)
4 x 1mm
2 x 1.5mm
Lighting Looking fabulous
Arguably one of the most discrete downlights available as it is only 3mm high and the Bezel has a diameter of 65mm
Paintable front plates
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Wide range of accessories
Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.
... simple to use and maintain
No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.
Available in cap type options: Edison screw E27 or Bayonet cap B22
Finish options: Powder coated white or Paint-able
The set includes:
- Pendant bridge
- Lamp-holder, 300mm white cord
- Front plate
- Mains connector
- Cut out size: 62mm
- Drop length: 300mm
Guarantee: 5 Years
What's in the box
This product has everything you need to install and fit our product with the exception of the GU10 lamp
First Fix Housing
The Housing (or mounting ring) complete with the supply connector and installation instructions
GU10 Lampholder and Connector
The "plug and play" GU10 Lampholder is pre-wired for your convenience
The Deep insert is supplied with a spring clip to fix the lamp into the insert, optional baffles are available (see above)
Two magnets are supplied - as the Levello system requires 3 magnets in total - the third magnet is attached to the Deep insert.
We supply a painting card to protect the interior of the first fix housing from contamination from paint if you are painting the ceiling with the housing installed
Levello products come with a 5-year warrantee
First Fix Installation
Installation is simple and quick.
A reasonably accurate 62mm hole needs to be cut in the ceiling, our Holesaw Stabiliser is ideal for this. The supply cable is terminated to the connector and then the housing is inserted into the hole, twisting it clockwise to allow Housing anchors to lock into place.
If painting after the housing has been installed please use the Painting cards provided to protect the inside of the housing from contamination.
Second Fix Installation
Firstly, fit the lamp into the Deep Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
|Plate Finish||Paintable Plate or RAL 9010 Plate|
|Lampholder Type||B22 or E27|