Product Description
The Soraa Vivid Minimal Trim Downlight is a recessed architectural downlight which at only 2mm proud of the ceiling it is one of the most discrete products on the market. The combination of the SORAA VIVID range of light sources and Levello Light fittings gives a luminaire which is flexible and easy to maintain and has fabulous colour rendering. once installed it has an almost invisible appearance in the ceiling, especially when used with paintable front plates.
Soraa VIVID lamps offer beautiful and accurate colour
and white rendering across the entire visible spectrum,
mimicking the natural range of sunlight, to deliver
unmatched quality of light for colour critical applications.
You can select from non fire-rated and 60-minute fire-rated options above; a variety of beam angles and beam shapes as well as Glare Reduction and Colour Changing Options.
This product is fully interchangeable with any of the products in the Levello range (all of the Levello products fit into the same housing). Luminaires and lamps (and even PIR's) can be swapped quickly and simply, should the need arise simply, quickly and easily without damaging the ceiling.
Technical Information
Physical Characteristics
Dimensions
Cut out 62 mm
Minimum Ceiling Void Depth 87-95 mm
(this depends upon in which magnet the lamp is installed)
Weight
with Classic Housing 245 g
with Retrofit Housing 330 g
Materials
Housing: Mild steel galvanised & powder coated
Electrical Characteristics
Connectors
3 Pole, 16A pluggable connectors
Cable capacity 4 x 1mm, 2 x 1.5mm
Power Factor 0.80
Input Power 230V +/- 23V, 50/60Hz
Technical Characteristics
Fire & Insulation
60 Minute Fire-Rated or non Fire-Rated
Not suitable for covering with insulation (see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
Luminaire 5 years
Soraa Lamp 3 years or 25,000 hrs (whichever comes first)
Rated lifetime to L70 35,000 hrs
Lamp Characteristics
Lamp Output and Power
7.5 W 390 - 455 lumens
9.5 W 465 - 490 lumens
Dimming
Compatible with trailing edge phase cut dimmers only.
Not for use with leading edge dimmers
Dimming and Flicker T24/JA8 compliant.
Please reference our compatibility
chart (in downloads) for dimmer and transformer
information
Colour Metrics
CIE Metrics 95 CRI, R9 95
TM30 Metrics: Rf 90, Rg 100
Whiteness Index: Rw 100
Product Features
Lighting Looking Fabulous
Completely flush finish
Once Installed, the Luminaire fits completely flush with the ceiling making it almost invisible.
Paintable front plate
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Simple easy installation
Plaster in light fittings can be challenging to install, but with our tried and tested installation method this is simple and easy.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products, such as a pendant.
Simply Perfect Light
Point Source Optics™
Point Source Optics deliver exceptional beam quality with
crisp shadows, perfect uniformity and precisely controlled
beam distributions from 10° to 60°.
SORAA VIVID COLOR™
Soraa VIVID lamps utilize full spectrum light to provide
industry-leading color rendition of CRI/95, R9/95, Rf/90,
Rg/100 for precise color reproduction.
SORAA NATURAL WHITE™
Soraa VIVID lamps are engineered to deliver outstanding
whiteness rendering for true-to-life whites, which matches
or exceeds incandescent sources at 2700K and 3000K.
Easy maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets. Pull the insert out and swap the lamp or even change the fitting.
What's in the box
This product has everything you need to install and fit our product
First Fix Housing
The Fire Rated Housing is supplied complete with the supply connector and installation instructions.
GU10 Lampholder and connector
The "plug and play" GU10 Lampholder is pre-wired for your convenience.
Magnets
Three magnets are supplied - as the Levello system requires 3 magnets in total ,the lamp and any accessories will be factory installed.
Decorators Cards
We supply decorators cards to protect the interior of the first fix housing from contamination from paint or plaster.
Soraa Vivid Lamp
The lamp will be fitted with any accessories ordered, just fit the GU10 Connector, pop it into the installed housing and the magnet will guide it into place.
Installation
First Fix Installation
Installation is simple and the results will be fabulous, as long as you follow our installation steps.
The supply cable is terminated to the connector and then housing is permanently fixed into the ceiling. The ceiling is then plastered so the rim of the housing is flush with the plastered ceiling (see Video). Decorators’ cards are provided to protect the inside of the housing from contamination with paint or plaster (see previous picture).
Second Fix Installation
Firstly, fit the lamp into the Low Profile Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide
| Fixture | |
|---|---|
| Fire Rating | 60 Minute Fire Rated or Non Fire Rated |
| Baffle | Black or White or Special Baffle |
| Plate Finish | Paintable or RAL 9010 or Custom Plate |
| Brand | Soraa |
| Ceiling void Height | 87-95 |
| Fitting Type | Minimal Trim |
| Insert Type | Low Profile |
| Lamp type | GU10 |
| Plate Shape | Round |
| IP Rating | IP20 |
| Light Sources | |
| Lamp Power | 7.5 Watts or 9.5 Watts |
| Beam Angle | 25° or 10° or 36° or 60° or 10°-25° Linear Diffusion or 10°-36° Linear Diffusion or 10°-60° Linear Diffusion or 25°-25° Flat Top or 36°-36° Flat Top or Frosted Diffusion or Aim Lens (up to 20° Beam Shift) |
| Colour Temperature | 2700 K or 3000 K or 4000 K |
| Glare Reduction | - or Honeycomb louvre |
| Colour Changing Effects | - or Coloured Gels or 1/4 CCT Shifter or 1/2 CCT Shifter or 3/4 CCT Shifter or Soraa Enhance Lens |
| Light Source Range | Soraa Vivid |
| CRI | 95 CRI |
| Driver | No Driver Required |
| Emergency Pack | - |